Lithium Battery Runtime Calculator

Estimate runtime from battery capacity, nominal voltage, usable capacity, load power, and system efficiency. Defaults are illustrative. Actual runtime varies with load, temperature, battery condition, and discharge rate.

Lead Acid Battery Runtime Calculator

Estimate runtime for a constant-power load using the battery’s rated capacity and Peukert exponent. Defaults are illustrative; actual runtime varies with battery condition, temperature, discharge rate, and other losses.

Battery Cycle Life Cost Calculator

Estimate battery purchase cost per kilowatt-hour delivered over its cycle life. Enter the rated cycle life at the selected depth of discharge; use a round-trip efficiency assumption appropriate to your battery and charging system. This simplified estimate assumes consistent cycling and excludes charging electricity, maintenance, replacement labor, and capacity fade. Defaults are illustrative.

Battery Depth of Discharge Calculator

Calculate the percentage of a battery’s rated capacity used between two charge measurements. Enter capacity and charge amounts in amp-hours (Ah). Remaining charge must not exceed starting charge, and neither charge amount should exceed rated capacity. The default values are illustrative; actual available capacity varies with conditions and battery age.

Battery Discharge Rate Calculator

Calculate a battery’s discharge rate in C from its load current and rated capacity. This estimate assumes a constant current and uses the battery’s stated amp-hour capacity; actual capacity and runtime vary with discharge conditions, temperature, age, and battery chemistry. Defaults are illustrative.

Battery Bank Energy Calculator

Estimate usable battery bank energy from the nominal voltage and capacity of one battery, the number of batteries, the chosen depth of discharge, and system efficiency. Batteries are assumed to be identical; series and parallel connections preserve the same total nominal energy. Actual usable energy varies with discharge rate, temperature, battery condition, and manufacturer limits. Defaults are illustrative assumptions.

Parallel Battery Capacity Calculator

Add the rated capacities of up to three compatible batteries connected in parallel. Enter 0 for an unused battery. The result is the ideal combined capacity in amp-hours; parallel connections retain the same nominal voltage. Actual usable capacity varies with battery condition, discharge rate, and system losses. Default values are illustrative.

Battery Series Voltage Calculator

Estimate the total voltage of identical batteries connected in series. Series voltages add; use the voltage measured or specified for each battery. This assumes all batteries have the same voltage and are connected in the same direction. Actual voltage varies with charge and load.

Car Battery Charger Size Calculator

Estimate the average charger output needed to replenish a battery within a target time. Defaults are illustrative. Actual charging slows near full charge, so allow extra time and follow the battery manufacturer’s charging-current limits. Choose a charger rated at or above the calculated output, within those limits.

Battery Cable Voltage Drop Calculator

Estimate voltage lost across a battery cable circuit using conductor resistivity. Enter the one-way cable length; the calculation assumes an equal-length return conductor and resistivity at approximately 20°C. Connections, temperature changes, and chassis-return resistance are not included. Defaults are illustrative.

Battery Cable Size Calculator

Estimate the minimum conductor cross-sectional area needed to limit voltage drop in a battery circuit. Enter the one-way cable length; the calculation includes both the outgoing and return conductors. Defaults are illustrative. Select a cable size at least as large as the result, then check ampacity, insulation temperature, installation conditions, short-circuit protection, and applicable standards separately.

Car Audio Battery Size Calculator

Estimate the usable battery capacity needed to run a car audio system with the engine off. Enter the amplifier’s average output power, estimated efficiency, battery voltage, listening time, and planned depth of discharge. This estimate excludes the vehicle’s starting and other electrical needs; choose the next larger suitable battery capacity.

Alternator Charging Time Calculator

Estimate the driving time needed to replenish a car battery using its capacity, initial and target charge levels, average charging current, and charging efficiency. The estimate assumes a constant average current; actual charging time varies as current tapers and vehicle electrical loads change.

Alternator Output Calculator

Estimate alternator electrical output in watts from its rated current, charging voltage, and assumed operating output. Actual output varies with engine speed, temperature, electrical demand, and alternator condition; the defaults are illustrative.

Car Battery Cost per Year Calculator

Estimate the annual cost of a car battery by spreading its purchase and installation costs over its expected service life, then adding annual maintenance costs. Defaults are illustrative; actual battery life and costs vary. This estimate excludes financing and the time value of money.

Car Battery Replacement Cost Calculator

Estimate the cost of a replacement car battery using your quoted battery price, installation time, labor rate, additional fees, and local tax rate. Defaults are illustrative; this estimate assumes tax applies to the entire subtotal. Actual charges and tax treatment vary.